Bachelor for Two Weeks

My partner is teaching at SFU over the Summer semester on Wednesday mornings so we have had a lot of in and out of town trips to Vancouver which has felt less of a commuting chore because of my surgery and follow up appointments.

Last Tuesday, we headed down to White Rock and Wednesday evening, I came back to Kelowna by myself.  The partner is currently en route to Paris, France and our son, en route to the Rockies with his grandparents.

I have been looking forward to the break in hopes of getting a lot of work done.  My past week has consisted of:

  • Tuesday – drove to WR, early to bed, less then 5 hours sleep (4 hours of driving)
  • Wednesday – SFU, East Van, Metrotown, SFU, WR, Kelowna, 7+ hours of travel
  • Thursday – mostly rest, little work
  • Friday – slept in, worked almost all day, little rest
  • Saturday – slept in, watched baseball, rest
  • Sunday – faerie coffee, rest, little work
  • Monday – slept in, chores, rest, little work

As you can see, lots of resting and not much work.  But, I keep having to remind myself that I am still recovering from surgery even though I don’t (and haven’t) really felt like it other then the first 11 days post op until the drains had come out.

The family gets back into White Rock in a week and I plan to get there by Tuesday evening so my partner has transportation to/from SFU and I will head into Vancouver to work and/or socialize with some friends.  I am contemplating a trip home to Vancouver Island to visit my family and hopefully get work done.

What feels like “little” work done over the past week has been mostly me trying to get organized, clear off plates and really focus on what is most important based on the goals I set in my Back to Reality post.  The worst thing anyone can do when setting goals is set themselves up for failure and I am really trying to focus on achievable goals that will benefit me the most come September.

My goals right now are focused primarily on two things:  Health and Career

Over the Summer while I finish recovering from surgery, I am trying ease myself back into working and gaining traction into my new career while eating healthy and increasing my stamina.  The greatest benefit about the career I am getting into is that while I am working on clients, I receive healing benefits as well.

So, what work have I been doing the past week and will I do over the next week to be working on achieving my goals:

Last week:

  • Started re-reading the Touch for Health book and taking notes
  • Back to eating fresh fruits and veggies, bbq’ing, re-cut out sugar/snacks
  • Resume – bought/returned tablet after headache trying to update resume (and blog)
  • Second blog post in a week (July 1 was actually posted July 6th after tablet return)
  • Pedometer – started wearing it again, last Wednesday’s total of 24,440 steps:

Pedometer

Upcoming week:

  • Write Exam for Level 1 of Crystal Healing Course
  • Photography – long trip down to coast with stops
  • continuing with above

Another key to the health equation is in maintaining hobbies that will also benefit in improving my mental health.  Quilting has been on my mind a lot lately and I think its beyond time for me to start working on another quilt (or two or three)!

My First Quilt!

This past Friday, March 18th, I finished my first quilt!

I started off by cutting strips off of three different flannel patterns.  I measured them off on the rotary board and cut them into 5″ squares.  Each strip of fabric made for eight 5″ squares leaving me with a hole in the middle.  I did not want to cut a whole strip of the blue flannel for just one square.  I had also not decided yet what I was going to do with the edges (let alone the backing).  My initial thought was possibly using the green turtle fabric for the border and middle square:

Cutting out the Pieces

Not knowing what to do about the middle piece, I decided to just start sewing the four outer strips together.  I was so excited to have gotten just this far on my quilt:

Strip sewing #2

I decided to just cut the blue flannel and use it as the center piece figuring I would use the rest of it for another project, another time and finished sewing the top together.  Making me even more excited about getting this far with my first quilt:

Quilt top sewn together #6

With this being my first quilting project, I left myself a bit of wiggle room when I cut the piece of Warm and Natural batting.  One thing we have noticed about where we purchase our fabric, is they are not very good at cutting straight lines.  I laid out the piece of batting I had cut to measure it to see just how incredibly uneven it was (not to mention the uneven edges of the top I had sewn together).  I deliberated for some time as to whether to just sew it as is or trim up the edges first.

I had just sat down to leave it as is when I changed my mind and trimmed it up (and very glad I did).  First I trimmed up the top and then I did my best to place it evenly on the batting and safety pinned the two together.  In some spots, the batting border was closer to 2″ and others, less then an inch.  I did my best to leave about an inch batting for the border but it was up to a 1/4″ short in one spot.  We have two quilting books (one on blocks and one for general tips and how-to’s) and one of them suggested a basting gun over safety pins for basting the layers together.  If you click on the image below, you can see both the safety pins (pinning the first two layers) and the pink basting tags (holding all three layers).  I picked up a basting gun at Michael’s for about $20 after a 50% off coupon.

About to Quilt first Quilt

To finish off the quilt, I sewed the seams along each 5″ blocks.  That was quick and easy and really pointed out how crappily I pieced together the squares!  Cut me some slack though, this is after all my first quilt and I used it more as a learning piece then anything.  The border was the trickiest of the whole quilt.  My having to stitch rip three of four borders and redo them was a good learning experience in needing to slow down a bit and pay attention.

Finished First Quilt

The entire work of this project was somewhat me “winging it” and learning as I go.  I looked online enough to know I wanted a 1/4″ foot to help with the piece work and that I would need at least three layers for the quilt.  A former boss of my often said, “learning is doing” and that’s what I did.  I will make an upcoming post about the tips and tricks I learned both from blogs I read and my whoopsies from this project.

My son has already claimed it as his own stating “how cool” it was!

Full Flickr set from Quilt #1:  Quilt Photo’s on Flickr

Quilting: Sew, We Need a Sewing Machine

Quilting can be done using one of two methods:  hand quilting or machine quilting (or a combination of both).

I decided to take up quilting as one of my new hobbies that did not involve the computer.  Knowing my hands can cramp up with other crafts, I did not want to be hand quilting.  Am I cheating with this being a non-computer based hobby by using a computerized sewing machine?  I had no idea sewing machines were computerized until we started looking around for one!

Before heading out to pick up a sewing machine, we looked around online at pricing and reviews to select the sewing machine that met both our needs and budget. Because of finances and not being sure how much use we would get out of the machine, I kept looking for ones I knew I saw that were under $100 to realize just how small and cheaply made they were.  Initially, we looked at machines that were as cheap as $79 to ones that were $350.  Most of the machines in this price range did not include any sort of cover and would have been another $35-50.  Having a very curious three year old son and not having a spot in the house for it to permanently live yet, the cover was a must.

Both having mothers who have had sewing machines for 30+ years, we decided it was better to spend more money on a machine that had a longer warranty and was known to be a better brand than something that was cheaper, cheaply built and we might have to replace in the next 3-5 years.

During our online searches, we were trying to find a sewing machine that was better suited for quilting or had reviews mentioning how well they worked for quilting.  I was also trying to find a store to buy it from that I knew was good for service and was local should there be any problems.  We narrowed it down to two Kenmore sewing machines off the Sears website – one which was $350 and another that was $500.  The one at $500 had a lot of reviews that mentioned quilting, the reviews were good and the warranty looked great:

  • 25 Year Limited Warranty on internal frame defects in material or workmanship
  • 10 Year Limited Warranty on Internal Mechanical Components
  • 2 Year Limited Warranty on External Sewing Machine components
  • 2 Year Limited Warranty on Electrical Equipment
  • 90 Day Limited Warranty on Parts and Labor

Because of the warranty, reviews and features, we decided to get the $500 machine.  This was a lot more then I was initially wanting to spend but we both viewed it as an investment for our family on an item we would use for many years to come – whether for quilting or say, patching up a foot long tear in our sons snow pants he needed to wear for the last few days of winter.  To help bring the cost down, we redeemed enough Sears points to get a $60 gift card and used a coupon to obtain more points for another $50 Sears gift card.  We also bought the three year servicing service through Sears for $79.99 that allows us to get the machine tuned up once a year among other things.

As luck always seems to have it for us picking up bigger items at the Sears in Kelowna, we had to order one in which took about a week to arrive because at the time, no trucks were driving through the Rocky Mountains from Edmonton.  I was also at the time awaiting the arrival of my new Canon T2i that we ordered online through Sears website on Boxing Day which was back ordered and finally arrived almost seven weeks after being ordered.

The Sewing Machine

Can you believe I was actually more excited about the arrival of our sewing machine then my new dSLR?  Certainly made that last week of waiting for my camera go by faster!  (and gave me something to take a picture of the sewing machine with)